Roland CAMM-2 PNC-2300 Owner's Manual download pdf (Page 191)

MaxMotion for Machines Chapter 14-191

Chapter 14:

Braille Font

Solustan provides two different fonts for the Braille

requirements. Once you have created Grade II Braille copy, bring it into

MaxMotion. You have a choice to apply one of the two Braille fonts

ABRAILLE and BBRAILLE fonts.

(1) ABRAILLE fonts

These fonts have a properly defined box and the Braille dots. Select the

font and select the size to be 0.430 inches. At this size the dot sizes, the

inter dot size, and the cell size should meet the ADA specification

requirements.

Typically, the user might be using a 0.030 or 0.035 diameter ADA tool.

Select the job and apply the offset tool to create the offset for your tool

size.

Next, with the same tool size, apply fill.

Select proper depth, speed, feed, etc. before starting the job.

(2) BBRAILLE fonts

These fonts have a properly defined box, oversize Braille dots, and the

routing patterns for the fill for a 0.035 size tool. Select the font and

select the size to be 0.430 inches. At this size the dot sizes, the inter dot

size, and the cell size should meet the ADA specification requirements.

If you are using a 0.035 tool, you do not need to apply and create any

offsets or fills.

Simply, select proper depth, speed, feed, etc. before starting the job

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 251 252

No comments

Roland CAMM-2 PNC-2300 Owner's Manual Page 191