Roland CAMM-2 PNC-2300 Owner's Manual download pdf (Page 215)

MaxMotion for Machines Appendix B-215

controller. You will not be able to use PC for other things while it is

processing a job.

(8) What if I want to stop a job in the middle of the engraving/

routing machine processing the job?

It depends upon a particular engraving/routing machine. Different

manufacturers suggest different actions. Please refer to the owner’s

manual for the engraving/routing machine.

Use Pause command in case of MaxMotion Virtual Controller software.

(9) I created a character “O”, outlined it, selected the character and

tried to fill. The character was completely filled up instead of

working just between the two parts of “O”. Why?

Once you create the outlines, every shape becomes an individual shape.

The outside circle of “O” does not own the inside circle. If you select

only the outside circle, it will fill the whole shape. If you drag the

mouse around the character and select both the shapes (blue dots will

show up on both the shapes), MaxMotion will subtract inside shape

from the outside and you will get desired result.

Another possibility is that for some reason both the shapes, inside and

outside, have the same path directions. Enlarge the shape with magnify-

ing glass, if necessary, and watch the position of the blue dots. The blue

dots should be on the inside of the outside circle and should be on the

outside of the inside circle. If any of these are not correct, select that

shape only and apply Reverse Path command from the Edit menu.

(10) Can I see the final design of my job just before sending it to the

routing machine?

Yes, you will see it on the main screen as well as in the MACHINE

dialog box.

(11) Many of my contractual jobs require precision in terms of the

height of the characters or objects as well as the length of the

message. How can I assure such precision with MaxMotion?

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 251 252

No comments

Roland CAMM-2 PNC-2300 Owner's Manual Page 215