Roland CAMM-2 PNC-2300 Owner's Manual download pdf (Page 35)

MaxMotion for Machines Chapter 2-35

Use the following procedure to install under Windows 95 or 98

(a) Type or Enter WIN at the DOS prompt to load Windows 95, if it

is not loaded already.

(b) Insert the MaxMotion floppy disk into drive a: or b:

(d) Type a:\setup or b:\setup (depending upon whether the

MaxMotion floppy is inserted in floppy drive A or B) and click OK.

The MaxMotion Installer dialog box appears.

(e) Accept the default target drive and directory displayed in the

dialog box, or select and type a new drive and directory.

(f) Follow the procedures and prompts on the screen and click OK as

prompted.

If MaxMotion was installed previously on the computer, it is possible

that a message might appear for a file named bwcc.dll for it being in

use. Simply, select the option of ‘do not install’ only for that file. When

installation is completed, a message appears indicating that the installa-

tion was successful.

Install MaxMotion device driver for machines with HPGL type

controllers

This procedure requires you to install Microsoft provided Generic/

TEXT only driver. This driver is included with Windows 95 or 98

version of the software from Microsoft. You need to have original

Windows diskettes or CD ready before you proceed with this step.

MaxMotion uses this Microsoft provided driver to communicate to

your controller.

(a) Start Windows, if you have not done so already. Click on the

START button and select Settings Group.

(b) Select Printers in the Settings Group and click on it.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 251 252

No comments

Roland CAMM-2 PNC-2300 Owner's Manual Page 35