Roland CAMM-2 PNC-2300 Owner's Manual download pdf (Page 48)

48 MaxMotion for Machines

axis. (You should still be declaring the lift value in the

Materials Menu for the short lifts between shapes while

machining.) OR DECLARED VALUE

IT IS IMPORTANT FOR THE OPERATOR TO UNDER

STAND THE TWO DIFFERENT Z AXIS SETTINGS:

1. MAXIMUM STROKE VALUE IN CASE THE LIMIT

SWITCH IS PRESENT OR DECLARED VALUE OF

THE MAXIMUM STROKE IN SECTION III OF THE

MACHINE SETUP... IF THE LIMIT SWITCH IS NOT

PRESENT. THIS VALUE WILL BE USED FOR THE Z

AXIS TO GO FROM THE ‘HOME’ POSITION TO THE

BEGINNING OF THE JOB AS WELL AS TO RETURN

BACK FROM FINISHING THE JOB TO THE ‘HOME’

POSITION.

2. TOOL LIFT VALUE IN THE MATERIALS MENU.

THIS LIFT VALUE WILL BE USED TO LIFT THE

TOOL BETWEEN THE SHAPES WHILE MACHINING.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 251 252

No comments

Roland CAMM-2 PNC-2300 Owner's Manual Page 48