Roland CAMM-2 PNC-2300 Owner's Manual download pdf (Page 55)

MaxMotion for Machines Chapter 3-55

B. Click ‘Get Name’ and open a previously stored file with

a list.

C. Click ‘Get Name’ and open a file provided by your

customer.

Step 6. Click ‘Get Name’ and select and open list.txt. The selected

file name with its path will show up in the List Management

dialog box. Click on OK.

Step 7. Click ‘Open’ in the List Management dialog box. Note that

the file is organized with names and titles in alternate lines.

The file can be edited at this point to make additions and

corrections like any word processor.

Step 8. Click on the File menu and Select ‘Exit’ to close the Note

Pad.

Step 9. It is time to select the variable locations on the design

plate. Hold down the shift key and click on ‘Name’ first. A

blue box should show up around ‘Name’. Next, click ‘Title’

while continuing to hold down the shift key. Both ‘Name’

and ‘Title’ should have blue boxes around them. Remember

that ‘Name’ was selected first.

Step10. Click ‘First’ in the List Management dialog box. Observe

the Name and Title changing to the first two lines of the

list.txt file. Use next and previous buttons to change the

jobs.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 251 252

No comments

Roland CAMM-2 PNC-2300 Owner's Manual Page 55