Roland GT-PRO Owner's Manual download pdf (Page 13)

Names of Things and What They Do

Rear panel

fig.00-0220

1. AMP CTL 1 Jack/AMP CTL 2 Jack

When using the AMP CONTROL function (p. 54),

connect to the jack used for switching guitar amp

channels.

2. CTL 3/4/EXP PEDAL 2 Jack

Connect the optional foot switches (such as the FS-6/

FS-5U) or expression pedal (such as the EV-5) here.

* With the factory settings, no function is assigned.

3. CTL 1/2 Jack

Connect the optional foot switches (such as the FS-6/

FS-5U) here.

4. EXP PEDAL 1 Jack

Connect an optional expression pedal (such as the EV-

5) here.

* With the factory settings, this is automatically set for use as

a foot volume (p. 55).

5. MIDI IN/OUT/THRU Connectors

Connect an FC-200 (p. 81) or other external MIDI

device here to transmit and receive MIDI information.

6. USB Connector

Use a USB cable to connect this connector to your

computer to exchange data between the GT-PRO and

the computer.

7. DIGITAL OUT Connector

Outputs digital audio signals.

8. LOOP 1/2 SEND/RETURN Jacks

When using LOOP 1/2 (p. 52), connect these to external

effects processors.

9. SUB OUT Jacks R/L (MONO)

There are 1/4” phone jacks that output unbalanced

signals.

Connect to amps, mixers, or other devices.

10.

SUB OUT Connectors R/L

There are XLR type connectors that provide balanced

output. Connect to amps, mixers, or other devices.

* The SUB OUT R/L connectors are unaffected by the SUB

volume knob (p. 17) and SUB OUT Level (p. 100). Signals

are always output at a fixed level (+4 dBu).

11.

GND LIFT Switch

This disconnects the 1: GND pin from the input’s

ground. Switch this to “ON” if humming or other noise

from ground loops becomes a problem. The GT-PRO is

normally used with this set to OFF.

12.

MAIN OUT Jacks R/L (MONO)

There are 1/4” phone jacks that output unbalanced

signals.

13.

PRE LOOP SEND/RETURN Jacks

When using PRE LOOP (p. 53), connect these to

external effects processors.

14.

DIRECT OUT/TUNER OUT Jack

Signals input through the INPUT jacks (front and rear)

are output as is without change.

Use these jacks when connecting tuners and similar

devices.

15.

INPUT Jack

The guitar is connected here.

Additionally, when the GT-PRO is installed in a system

rack, signals sent to the GT-PRO from other rack-type

equipment are input here.

* This jack cannot be used simultaneously with the INPUT

jack on the front panel. The front panel INPUT jack takes

precedence.

1 2 3 4 8

5 6 7

14 1512 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO