Roland GT-PRO Owner's Manual download pdf (Page 90)

Chapter 9 Using the GT-PRO Connected to a Computer Via USB

Recording the GT-PRO’s

Output with a Computer

Set your application (such as a sequence software) so that the

audio input port it uses is the GT-PRO.

You can freely set the point in the signal chain from which to

extract the signal to be sent to the computer with Effect

Chain (p. 22). For example, by setting this so that the

computer records the signals as they are at the beginning of

the chain, you can record the sounds without any effects

added while you listen to the performance with the effects

applied.

* If you are using the software to send the audio data through,

set Direct Monitor to Off.

Applying Effects with the GT-PRO to

a Computer’s Audio Playback

Set the audio output port used by applications to the GT-

PRO.

You can use the GT-PRO to add effects to audio data played

back from the computer, and then record these sounds back

to the computer.

Use this feature when you want to add effects to existing

audio data.

fig.09-0130

1. Press [SYSTEM].

2. Press PARAMETER [ ] [ ] so that “Input

Select” is displayed.

fig.09-0140d

3. Rotate the PATCH/VALUE dial to select “USB In.”

USB In:

Effects are applied to the signals input via USB.

* In this mode, set the software so that audio is not transmitted

through (not set to Thru).

* PRE LOOP (p. 53) is unavailable.

Guitar In:

Effects are applied to the signals input via the INPUT

jacks.

Audio played back from a computer is mixed with the

GT-PRO’s effect sound and output jacks set in USB Mix

Channel (p. 89).

4. Press [EXIT] to return to the Play screen.

Parameter/

Range

Explanation

USB Monitor Cmd (USB Monitor Command)

fig.09-0110d

Disable, Enable

This setting determines whether or not the

command (the Direct Monitor command)

controlling the Direct Monitor (described

later) setting is enabled.

Disable

The Direct Monitor command is disabled, maintaining the Direct

Monitor mode set by the GT-PRO.

Enable

The Direct Monitor command is enabled, allowing the Direct Moni-

tor mode to be switched from an external device.

USB Dir Monitor (USB Direct Monitor)

fig.09-0120d

On, Off

Switches the output of the effect sound to

the PHONES jack, MAIN OUT jacks, or SUB

OUT jacks.

The effect sound is output. Set this to On when using the GT-PRO as

a standalone device, without connecting to a computer (no sound

will be output if this is set to Off).

Off

Set this to Off if transmitting audio data internally through a com-

puter (Thru).

* If you are using the special driver, you can control Direct Monitor On/

Off from ASIO 2.0-compatible application such as Cubase.

132

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 90

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO