Roland GT-PRO Owner's Manual download pdf (Page 68)

Chapter 6 Using Pedals to Control the Effects

* Although you can set this so that the same target is controlled

by more than one controller, in such cases, make sure not to

have different sources changing the parameter at the same

time. Changing the parameter simultaneously using different

sources may result in noise being generated.

When setting the target, you can search for the desired

target more rapidly by pressing [SHIFT], causing the

indicator to light, and then rotating the PATCH/VALUE

dial.

To return to the normal mode, press [SHIFT] once again

so the indicator goes out.

Target Range

fig.06-0160d

The value of the parameter selected as the target changes

within the range defined by “Min” and “Max,” as set on the

GT-PRO.

When using an external foot switch, or other controller that

acts as an on/off switch, “Min” is selected with Off

(CLOSED), and “Max” is selected with On (OPEN).

When using an external expression pedal or other controller

that generates a consecutive change in the value, the value of

the setting changes accordingly, within the range set by the

minimum and maximum values.

Also, when the target is of an on/off type, the median value

of the received data is used as the dividing line in

determining whether to switch it on or off.

When using the foot switch:

fig.06-0170

When using the EXP pedal:

fig.06-0180

When controlling the On/Off target with the

EXP pedal:

fig.06-0190

* The range that can be selected changes according to the target

setting.

* When the “minimum” is set to a higher value than the

“maximum,” the change in the parameter is reversed.

* The values of settings can change if the target is changed after

the “minimum” and “maximum” settings have been made. If

you’ve changed the target, be sure to recheck the “minimum”

and “maximum” settings.

Patch Bank Inc

Switches to the next higher bank number.

Patch Bank Dec

Switches to the next lower bank number.

Value Explanation

Amount of change in

parameter value

maximum value

Target Max

minimum value

Target Min

Depress

Foot Switch

Off

Release

maximum value

Target Max

minimum value

Target Min

When the pedal

is fully advanced

When the pedal

is fully raised

EXP Pedal

Off

Target Max

Off

Target Min

When the pedal

is fully advanced

When the pedal

is fully raised

When the pedal

is advanced halfway

EXP Pedal

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 68

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO