Roland GT-PRO Owner's Manual download pdf (Page 96)

Chapter 10 Other Features

Adjusting the Display

Contrast (LCD Contrast)

Depending on where the GT-PRO is placed, the display (on

the right) may become difficult to read. If this occurs, adjust

the display contrast.

fig.10-0230

1. Press [SYSTEM], then press PARAMETER [ ]

[] so that “LCD Contrast” is displayed.

fig.10-0240d

2. Rotate the PATCH/VALUE dial to adjust the contrast.

Valid Settings: 1–16

3. Press [EXIT] to return to the Play screen.

Switching the Sounds Input

to the GT-PRO (Input Select)

This selects the input sounds, those input through the INPUT

jacks or those input via USB, to which the effects are applied.

fig.10-0250

1. Press [SYSTEM].

2. Press PARAMETER [ ] [ ] so that “Input

Select” is displayed.

fig.09-0140d

3. With the PATCH/VALUE dial, select the input to be

used for the effects.

4. Press [EXIT] to return to the Play screen.

2 11

Value Explanation

Guitar In

Effects are applied to the sounds input

through the INPUT jacks.

USB In

Effects are applied to the sounds played

back by the USB-connected computer.

* In this mode, set the software so that audio

is not transmitted through (not set to

Thru).

* PRE LOOP (p. 53) is unavailable.

2 11

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 163 164

No comments

Roland GT-PRO Owner's Manual Page 96