Roland GT-PRO Owner's Manual download pdf (Page 98)

Chapter 10 Other Features

Using the Identical Preamp Settings

in All Patches (Preamp Mode)

With the GT-PRO, you can have a preamp be set globally for

use in all patches.

This provides an effect that always gives you the sound of

the same guitar amp regardless of the patches you set.

fig.10-0300

1. Press [SYSTEM], then press PARAMETER [ ]

[] so that “Preamp Mode” is displayed.

fig.10-0310d

2. Rotate the PATCH/VALUE dial to change the setting’s

value.

3. Press [EXIT] to return to the Play screen.

Setting the System Preamp

When the Preamp Mode is set to System, preamp settings

made by adjusting the panel controls are treated as system

preamp settings.

The stored content is updated each time the settings are

changed.

Limiting the Patches That Can Be

Switched (Patch Extent)

By setting an upper limit to the patches, thus limiting the

range of patches that can be switched, you can set the GT-

PRO so that only the patches you need can be selected.

fig.10-0320

1. Press [SYSTEM], then press PARAMETER [ ]

[] so that “Patch Extent” is displayed.

fig.10-0330d

2. Rotate the PATCH/VALUE dial to set the upper limit

for the Patches.

Valid Settings: 1-1–40-10

* The bank numbers indicated are lowered by one when FC-200

mode (p. 81) is switched on, so U0-1 to P39-10 is displayed.

3. Press [EXIT] to return to the Play screen.

Value Explanation

Patch

The patch preamp setting is used. This al-

lows you to use different preamp settings

in each individual patch.

System

The system’s preamp setting is used. This

applies the same preamp settings to all

patches.

2 11

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 98

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO