Roland GT-PRO Owner's Manual download pdf (Page 47)

Chapter 4 Introduction to Effects and Parameters

Chapter 4

PB (Pedal Bend)

This lets you use the pedal to get a pitch bend effect.

The EXP pedal automatically switches to the pedal bend

function when PB is selected.

* Because of the need to analyze the pitch, chords (two or more

sounds played simultaneously) cannot be played.

When you have an EXP pedal connected to the EXP PEDAL 1

jack or FC-200 EXP pedal, you can set the pedal so that it

automatically begins functioning as a pedal bend when this

effect is switched on (p. 63, p. 64).

OC (Octave)

This adds a note one octave lower, creating a richer sound.

RT (Rotary)

This produces an effect like the sound of a rotary speaker.

Parameter/

Range

Explanation

Pitch Min

-24–+24

This sets the pitch at the point where the ex-

pression pedal is fully lifted.

Pitch Max

-24–+24

This sets the pitch at the point where the ex-

pression pedal is all the way down.

Pdl Position (Pedal Position)

0–100 Adjusts the pedal position for pedal bend.

Effect Level

0–100 Adjusts the volume of the pitch bend sound.

Direct Level

0–100 Adjusts the volume of the direct sound.

Parameter/

Range

Explanation

Range

Range 1, 2, 3, 4

This selects the pitch range for the input

sound to which you want to add the effects.

Range 1

7th string, open (B) to 1st string, 24th fret (E)

Range 2

7th string, open (B) to 1st string, 12th fret (E)

Range 3

7th string, open (B) to 1st string, open (E)

Range 4

7th string, open (B) to 4th string, 2nd fret (E)

Octave Level

0–100

Adjusts the volume of the sound one octave

below.

Direct Level

0–100 Adjusts the volume of the direct sound.

Parameter/

Range

Explanation

Speed Sel (Speed Select)

Slow, Fast

This parameter changes the simulated

speaker’s rotating speed (Slow or Fast).

Rate (Slow)

0–100,

BPM –BPM

This parameter adjusts the speed of rotation

when set to “Slow.”

Rate (Fast)

0–100,

BPM –BPM

This parameter adjusts the speed of rotation

when set to “Fast.”

* When the Rate (Slow) or Rate (Fast) set to BPM, the value of each

parameter will be set according to the value of the Master BPM (p. **)

specified for each patch. This makes it easier to achieve effect sound

settings that match the tempo of the song (synchronizing the cycle to

one-half or one-fourth of the BPM when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] several times to

display the Master BPM settings screen.

Rise Time

0–100

This parameter adjusts the time it takes for

the rotation speed to change when switched

from “Slow” to “Fast.”

Fall Time

0–100

This parameter adjusts the time it takes for

the rotation speed to change when switched

from “Fast” to “Slow.”

Depth

0–100

This parameter adjusts the amount of depth

in the rotary effect.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 163 164

Comments to this Manuals

No comments

Roland GT-PRO Owner's Manual Page 47

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland GT-PRO